• Fully bunded construction helps you comply with even the most demanding installation requirements;
• Approved by the experts at The Oil Firing Technical Association (OFTEC) in accordance with the OFS T100 standard;
• BS/IS EN 13341 compliant - a legal requirement for all heating oil tanks supplied in the UK and EU today;
• UV-stabilised polymers protect against the damaging effects of sunlight;
• Suitable for the storage of a wide range of liquid heating fuels, including Gas Oil, Kerosene, and next-generation Hydrotreated Vegetable Oil (HVO);
• Conditional, manufacturer-backed, 10-year warranty;
• Lockable access lid;
• Factory fitted mechanical overfill prevention valve, to reduce the risk of overfills and spills;
• Factory fitted vent, fill and access points;
• Manufactured from a fully-recyclable grade of medium density polyethylene.

This Bunded Heating Oil Tank is supplied as standard with:

• 2” BSP oil tank fill point with mechanical overfill prevention valve;
• Integral, weatherproof vent;
• Oil tank inspection point;
• Lockable access lid;
• 32mm. dia. electronic gauge point;
• 1” BSP bottom outlet.

Upon request, the following equipment can also be supplied with this tank. Contact your supplier for further information:

• Bottom outlet oil tank fitting kit;
• Top outlet connection in lieu of 1" BSP bottom outlet;
• Wireless oil tank contents monitor.

All heating oil tanks must be installed and maintained, by a suitably competent person e.g. a technician registered with The Oil Firing Technical Association (OFTEC). 

Installation and maintenance, must comply with the requirements of: 

• Supplied instructions;
• OFTEC Technical Instruction Book 3;
• Prevailing statutory requirements.

Failure to install and to maintain this product in accordance with supplied instructions may invalidate product warranty.

Atlas bunded heating oil tanks are approved for the storage of the following fuels, when connected to a fixed combsution appliance e.g. boilers, space heater, or oil-fired cooker:

• Grade A2 Gas Oil  to BS2869;
• Grade D Gas Oil to BS2869; 
• Grade C1/ C2 Kerosene to BS2869; 
• Diesel to BS/IS EN590;
• Paraffinic Diesel fuel to BS/IS EN 15940;
• Liquid Biofuels and Hydrotreated Vegetable Oil (HVO) to BS/IS EN15940. 

All Atlas bunded heating oil tanks, benefit from a ten-year, conditional, manufacturer backed warranty, against manufacturing, material and design defect. 

Please note registration may be required to activate the warranty supplied with this product.