• Compact dimensions: Space-saving product footprint for ease of installation at premises where space is limited;
• Just 670mm wide: Narrow enough to pass through a standard doorway, for ease of installation;
• OFTEC approved: Approved by the experts at The Oil Firing Technical Association (OFTEC) in accordance with OFS T100;
• BS/IS EN 13341 compliant: Engineere to exceed all applicable British, Irish and EU product requirements;
• UV-stabilised polymer: Inbuilt protection against the damaging effects of sunlight
• Industty-leading 5year warranty: Supplied with a conditional, manufacturer warranty for added peace of mind;
• Padlock-ready access: Fill and access points can be secured with a padlock for additional security;
• Pre-installed vent and fill/access points for ease of installation;
• Fully recyclable material: Manufactured from a fully recyclable grade of medium-density polyethylene (MDPE).

This Carbery Single Skin Heating Oil Tank is supplied as standard with:

• Fill / access point;
• 32mm. dia. electronic gauge connection point;
• 1” dia. BSP bottom outlet

Upon request, the following equipment can also be supplied with this tank. Contact your supplier for further information:

• Bottom outlet oil tank fitting kit, comprising fuel filter, lever type isolation valve, 1"/0.5" reducer, PTFE tape and Heldite liquid sealant;
• Wireless oil tank contents gauge.

All Carbery heating oil tanks must be installed and maintained, by a suitably competent person e.g. a technician registered with The Association of Pkumbing & Heating Contractors (APHC) or The Oil Firing Technical Association (OFTEC). 

Installation and maintenance, must comply with the requirements of supplied instructions, OFTEC Technical Instruction Book 3, and prevailing statutory requirements. 

Before installing any skingle skin heating oil tank, a risk assessment must be completed by a suitable competent person e.g. an APHC or OFTEC Registered Technician. 

Failure to install and to maintain this product in accordance with supplied instructions will invalidate product warranty.

Suitable for the storage of Agricultural Fuel Oil, Diesel, Gas Oil, Kerosene and Heating Oil, at installations where a bunded tank is not required, or for installation within a suitably bunded area. 

Five-year, conditional, manufacturer backed warranty, against manufacturing, material and design defect. Please note registration may be required to activate the warranty supplied with this product.