• Fully bunded construction, helps you comply with even the most demanding installation requirements;
• Ease of installation - thanks to a compact footprint - making the 650RB ideal for homes where access is limited, or space is restricted;
• Approved by the experts at The Oil Firing Technical Association in accordance with OFTEC's OFS T100 standard;
• BS/IS EN 13341 compliant - a legal requirement for all domestic heating oil tanks sold in the UK and EU today;
• UV-stabilised to protect against the damaging effects of sunlight;
• Suitable for the storage of Gas Oil, Kerosene, and next-generation Hydrotreated Vegetable Oil (HVO) heating fuels;
• Conditional, manufacturer-backed, 10-year warranty;
• Padlock-ready fill and access points, to help protect against the risk of heating oil theft;
• Factory fitted vent, fill and access points;
• Manufactured from a fully-recylable grade of medium density polyethylene.

This Carbery Bunded Heating Oil Tank is supplied as standard with:

• 2” lockable oil tank fill point;
• 5” lockable oil tank inspection point;
• Lockable access lid;
• 32mm. dia. electronic gauge point;
• Tank contents dipstick;
• 1” BSP bottom outlet.

Upon request, the following equipment can also be specific with this tank. Contact your supplier for further infirmation:

• Bottom outlet oil tank fitting kit, comprising fuel filter, lever type isolation valve, 1"/0.5" reducer, PTFE tape and Heldite liquid sealant;
• 10mm top outlet connection in lieu of 1" BSP bottom outlet;
• Wireless oil tank contents gauge.

All Carbery heating oil tanks must be installed and maintained, by a suitably competent person e.g. a technician registered with The Oil Firing Technical Association (OFTEC). 

Installation and maintenance, must comply with the requirements of supplied instructions, OFTEC Technical Instruction Book 3, and prevailing statutory requirements. 

Failure to install and to maintain this product in accordance with supplied instructions will invalidate product warranty.

This Carbery bunded heating oil tank is approved for the storage of a wide range of liquid heating fuels, when connected to a fixed combsution appliance e.g. oil-fired boiler, cooker, or heater:

• Gas Oil  (A2/D) to BS 2869; 
• Kerosene (C1/C2) to BS2 869; 
• Diesel to BS/IS EN 590;
• Hydrotreated Vegetable Oil (HVO) to BS/IS EN 15940. 

Please note that heating oil tanks are not suitable for connection to gravity fed vehicle Diesel delivery systems. 

Ten-year, conditional, manufacturer back warranty, against manufacturing, material and design defect. Please note registration may be required to activate the warranty supplied with this product.